<MeganBear> Hello everyone!
<MeganBear> GOOD TO SEE YOU ALL HERE EARLY!
<Cher> hi!
<cak> Hi Ms Megan
<MeganBear> HOW ABOUT A SNEAK PEAK AT THE SAMPLE PAGE?
<MeganBear> http://www.bearrubberstamps.com/LiquidGlass.html
<cak> Lookin' at them right now--great stuff (as usual)
<MeganBear> WOW - LOOK AT ALL THE PEOPLE THAT SHOWED UP WHILE I WAS DOWNSTAIRS!
<MeganBear> http://www.bearrubberstamps.com/LiquidGlass.html
<MeganBear> GO TAKE A LOOK AT THE SAMPLES - I'LL BRB.
<MeganBear> http://www.bearrubberstamps.com/LiquidGlass.html
<MeganBear> HI LORRIE
<MeganBear> HI SCOUT
<MeganBear> HI EVERYONE!
<MeganBear> http://www.bearrubberstamps.com/LiquidGlass.html
<Scout> Hi, every one!
<MeganBear> http://www.bearrubberstamps.com/LiquidGlass.html
<Carlotta> cool samples!
<FrancesWV> Megan, the samples look raised, instead of like impressions. How did you do that?
<MeganBear> HERE'S A LINK TO THE SAMPLES PAGE
<MeganBear> http://www.bearrubberstamps.com/LiquidGlass.html
<FrancesWV> I love those samples too.
<MeganBear> FRANCES - I THINK IT'S BECAUSE OF THE BLACK INK ON THE STAMP
<MeganBear> SO ARE YOU MOST OF YOU JUST GOING TO TAKE NOTES, OR IS ANYONE GOING TO ACTUALLY WORK WITH ME?
<MeganBear> I WASN'T SURE IF ANYONE HAD THE LIQUID GLASS
<MeganBear> http://www.bearrubberstamps.com/LiquidGlass.html
<AliciaG> taking notes
<FrancesWV> I'll just take notes
<Judy> taking notes
<cak> I'm doing it virtual (sadly--I've been wanting to try this)
<labelle> notes
<FrancesWV> I have the liquid glass, but I can't chat and work at the same time
<Carlotta> I wish I could bet there is no where here to plug in an embossing gun.
<MeganBear> WELL THEN I'LL MAKE SURE TO EXPLAIN THINGS REALLY WELL, AND REFER OFTEN TO THE SAMPLES
<MeganBear> SHALL WE START THEN?
<labelle> ty,
<FrancesWV> Yes
<Cher> ready
<MeganBear> HERE'S A LINK TO THE SAMPLES PAGE AGAIN
<MeganBear> http://www.bearrubberstamps.com/LiquidGlass.html
<MeganBear> AND OF COURSE, I'VE GOT TO START OFF WITH A SPECIAL!
<MeganBear> I KNOW HOW YOU ALL LOVE THOSE!
<FrancesWV> Oh yes!
<labelle> we do
<MeganBear> GET YOUR PENCILS READY!
<FrancesWV> My trusty post it note pad
<cak> (it's like throwin' chum to sharks)
<MeganBear> HERE'S A LINK TO OUR CATALOG PAGE
<MeganBear> http://www.bearrubberstamps.com/catalog.html
<MeganBear> YOU'LL FIND THE SPECIAL ON THE INKS & EMBOSSING POWDERS PAGE
<MeganBear> BUT NOT UNTIL AFTER CLASS
<MeganBear> I DIDN'T HAVE TIME TO ADD THE SPECIAL YET
<MeganBear> THE SPECIAL IS:
<MeganBear> 6 1-OUNCE JARS OF LIQUID GLASS
<MeganBear> AND 2 1-OUNCE JARS OF REG EP (NORTHERN LIGHTS & SILVER)
<MeganBear> PLUS A PACKAGE OF 12 MATBOARD TILES
<MeganBear> PLUS A SAMPLE TILE
<MeganBear> PLUS A SMALL SHEET OF TEFLON
<MeganBear> PLUS INSTRUCTIONS FOR THE TECHNIQUE
<FrancesWV> All kinds of goodies!
<MeganBear> ALL FOR ONLY $20.00 + SHIPPING
<MeganBear> IT'S VALUED WELL OVER THE $20, I PROMISE
<Judy> sounds good
<cak> Wow! A whole kit!
<pmstamper> wow
<LindaR> is this the same liquid glass that used to be sold by think ink?
<FrancesWV> Yes, it is a good deal!
<MeganBear> YES A WHOLE KIT TO GET YOU STARTED
<Carlotta> great deal!
<MeganBear> YES, LINDA
<FrancesWV> Question?
<MeganBear> I CARRY ALL THE THINK INK POWDERS
<Bonnie> ty,ty,ty,ty,ty!
<LindaR> great to have it available again, its great stuff
<MeganBear> THEY ARE NOW THE EMBOSSING POWDER CANDY STORE
<FrancesWV> Can we order just some tiles for embossing on?
<MeganBear> YES, FRANCES
<FrancesWV> What size are the packages?
<Bonnie> I was going to order it anyway, glad I wiated
<MeganBear> I'LL HAVE THOSE ALL UP ON THE INKS &EMBOSSING POWDERS SECTION OF MY CATALOG AFTER CLASS
<FrancesWV> And how much do they cost?
<MeganBear> THE TILES COME 12 TO A PACKAGE, MISC COLORS, FOR $2.00
<FrancesWV> Good deal
<MeganBear> THE TILES ARE 2" SQUARE - I FOUND THAT'S THE BEST SIZE FOR ME
<MeganBear> OK NOW THAT THE SPECIAL IS OUT OF THE WAY, LET'S GET BUSY!
<MeganBear> I'LL REPEAT THE SPECIAL LATER
<Bonnie> yay!
<MeganBear> http://www.bearrubberstamps.com/LiquidGlass.html
<labelle> okay what do we do
<MeganBear> FIRST, INGREDIENTS!
<MeganBear> YOU NEED MATBOARD TILES OR CUT UP CD'S
<MeganBear> YOU NEED A HEATGUN
<MeganBear> AND A TEFLON SHEET IS NICE, BUT NOT ABSOLUTELY NECESSARY
<MeganBear> YOU MAY ALSO WANT TO USE AN OLD TIN PIE PAN OR SMALL COOKIE SHEET TO CONTAIN YOUR MESS!
<MeganBear> YOU'LL NEED PIGMENT INK PADS,BOTH COLORED AND CLEAR
<FrancesWV> I hear that the Reynolds non stick foil is good for thick embossing techniques
<MeganBear> YOU'LL NEED BOLD STAMPS
<MeganBear> FRANCES - I HAVEN'T TRIED THAT YET
<jenmist> sorry
<MeganBear> SORRY FOR WHAT - I MUST HAVE MISSED SOMETHING
<FrancesWV> Me too.
<MeganBear> AND OF COURSE, YOU'LL NEED LIQUID GLASS
<jenmist> lol - too many windows
<MeganBear> OK
<MeganBear> I USUALLY LAY MY TEFLON SHEET ONTO MY TIN PIE PLATE OR COOKIE SHEET
<MeganBear> YOU'LL HAVE SOME LOOSE POWDER BLOW AROUND, SO THIS HELPS TO CONTAIN IT
<MeganBear> THEN I CHOOSE A MATBOARD TILE, AND SOME CLEAR PIGMENT INK
<MeganBear> I SMOOSH THE INK ALL OVER THE TILE,ON ONE SIDE ONLY, THEN LAY IT ON THE SHEET INKED SIDE UP
<MeganBear> A HINT FOR YOU:
<MeganBear> YOU'LL WANT TO DUMP YOUR JARS OF LG INTO A SQUARE GLADWARE-TYPE CONTAINER
<MeganBear> THIS MAKES IT MUCH EASIER TO USE IT.
<MeganBear> ALSO, A PAIR OF TWEEZERS, PREFERRABLY THE BENT KIND, COME IN REAL HANDY!
<MeganBear> OK, YOU'VE GOT YOUR TILE INKED AND YOUR LG IN SQUARE CONTAINERS.
<MeganBear> EVERYONE WITH ME SO FAR?
<AliciaG> yes
<iamagas> yup
<labelle> so far
<FrancesWV> yes
<Judy> yep
<DianeC> yup
<Bonnie> :)
<cak> yep! (especially the tweezers part--good idea)
<MeganBear> TAKE A LOOK AT THE SAMPLES PAGE REAL QUICK
<MeganBear> http://www.bearrubberstamps.com/LiquidGlass.html
<MeganBear> I'LL BE TALKING ABOUT THE ROSE TILE ON THE TOP RIGHT - IT LOOKS REDDISH
<MomCat> How long should the tweezers be?
<MeganBear> JUST NORMAL SIZE - THE ONES I USE CAME IN A TOOL SET FROM WALMART
<MeganBear> IT'S WHATEVER YOU ARE COMFORTABLE WITH, REALLY.
<MeganBear> OK, NEXT SET OF INSTRUCTIONS
<MeganBear> EITHER WITH YOUR FINGERS, OR WITH TWEEZERS, PICK UP THE INKED TILE AND LAY IT INKED SIDE DOWN INTO THE BLACK LG
<Corinna> Actually, I'll brb - gotta change computers
<MeganBear> PICK IT BACK UP, AND GENTLY TAP IT OFF AGAINST THE SIDE OF THE DISH TO GET THE EXTRA POWDER OFF
<MeganBear> LAY IT BACK ONTO YOUR TEFLON SHEET LG SIDE UP
<MeganBear> THEN HEAT IT UNTIL IT MELTS
<MeganBear> ANOTHER TIP:
<MeganBear> I PUT THE HEATGUN IN MY NON-DOMINANT HAND, AND USE MY DOMINANT HAND TO MANIPULATE THE TWEEZERS
<MeganBear> YOU HAVE MUCH BETTER CONTROL THIS WAY
<MeganBear> JOYCE - HERE'S THE SAMPLE PAGE
<MeganBear> http://www.bearrubberstamps.com/LiquidGlass.html
<JoyceSBS> what's the link to this class
<JoyceSBS> ha, you bet me!
<MeganBear> WELCOME
<MeganBear> ONCE THE FIRST LAYER OF BLACK POWDER IS MELTED, QUICKLY PICK UP THE TILE AND PUT IT FACE DOWN INTO THE BLACK LG AGAIN
<MeganBear> PICK IT UP, TAP OFF THE EXCESS AND MELT THIS LAYER
<MeganBear> YOU USUALLY WANT 3 OR 4 LAYERS ON YOUR PIECE - ANY MORE AND IT GETS A LITTLE MESSY
<MeganBear> THE THIRD LAYER WE'LL DO IS PEARL RED
<cak> OH, *that's* how you get the red!
<MeganBear> THE CRYSTALS LOOK LIKE CLEAR CRYSTALS, BUT WHEN YOU PUT IT ON TOP OF THE BLACK, IT TURNS IT REDDISH
<MeganBear> IT'S REALLY COOL
<MeganBear> IT WORKS THAT WAY WITH ALL FOUR OF THE PEARL COLORS
<pmstamper> coooooool.
<cak> I just love pearl colors--very intriguing
<MeganBear> THE ONLY TWO I HAVE IN RIGHT NOW ARE PEARL RED AND PEARL GREEN - PUT THERE IS ALSO PEARL BLUE & PEARL PURPLE AVAILABLE
<MeganBear> SO GO BACK TO THE SAMPLE PAGE
<MeganBear> http://www.bearrubberstamps.com/LiquidGlass.html
<MeganBear> AND LOOK AGAIN AT THE FIRST FOUR SAMPLE TILES
<MeganBear> THESE ARE ALL DONE WITH TWO LAYERS OF BLACK AND ONE LAYER OF PEARL
<MeganBear> THE GREEN ONE MIGHT BE ACTUALLY ONE LAYER OF BLACK, AND TWO LAYERS OF PEARL
<MeganBear> AFTER THE SECOND LAYER OF BLACK LG IS MELTED, PUT THE TILE INTO THE PEARL RED LG
<MeganBear> BUT BEFORE YOU MELT IT, YOU SHOULD GET YOUR STAMP READY
<MeganBear> I SAID BOLD STAMPS AT THE BEGINNING FOR A REASON
<MeganBear> IF YOU USE HIGHLY DETAILED STAMPS, YOU WILL LOSE THE DETAIL IN THIS TECHNIQUE
<MeganBear> TERI - HERE'S A LINK
<MeganBear> http://www.bearrubberstamps.com/LiquidGlass.html
<Teri> Sorry to be late, Had to work late
<MeganBear> DEEDEE, HERE'S A LINK
<MeganBear> http://www.bearrubberstamps.com/LiquidGlass.html
<MeganBear> THAT'S OK - WELCOME TO BOTH OF YOU!
<MeganBear> GRAB YOUR BOLD STAMP, AND EITHER A CLEAR OR COLORED PIGMENT INK PAD
<MeganBear> IN MY SAMPLES I USED A BLACK INK PAD
<MeganBear> INK UP YOUR STAMP AND SET IT TO THE SIDE
<MeganBear> NOW HEAT AND MELT THAT THIRD LAYER OF POWDER
<MeganBear> YOU'LL SEE AS YOU'RE HEATING THAT THE FIRST LAYER IS PEBBLY, THE SECOND LAYER STARTS TO SMOOTH OUT,
<MeganBear> BUT THE THIRD LAYER REALLY LOOKS GLASSY
<FrancesWV> What kind of pigment ink are you using? Won't some of them smear off when it is cool?
<MeganBear> NO, THE INK WILL BE FINE
<MeganBear> I HAVE IN FRONT OF ME THE TILES DONE FOR THE SAMPLE PAGE,
<MeganBear> AND I CAN'T RUB ANY OF THE INK OFF OF IT
<MeganBear> AFTER TIME AND COOLING THE INK WILL BE FINE
<FrancesWV> OK
<MeganBear> JUST DON'T PUT TONS AND TONS OF INK ON YOUR STAMP, AND IT SHOULD BE OK
<MeganBear> QUEEN - HERE'S A LINK
<MeganBear> http://www.bearrubberstamps.com/LiquidGlass.html
<TAC-Queen> ty meegan
<MeganBear> OK, THE PEARL RED IS MELTED, TURN OFF YOUR HEAT GUN
<MeganBear> COUNT TO MAYBE 10 OR 15
<MeganBear> THEN PUT THE INKED STAMP INTO THE TILE
<MeganBear> MAKE SURE TO PUT IT ON STRAIGHT AND SLOW, OTHERWISE YOU'LL SLIDE IT RIGHT OFF!
<MeganBear> PUT EVEN PRESSURE ON THE STAMP
<MeganBear> THIS PART IS ONE YOU'LL HAVE TO PRACTICE WITH
<MeganBear> IT'S HARD TO CONVEY IN WORDS JUST THE AMOUNT OF PRESSURE YOU'LL NEED
<MeganBear> EVERYONE STILL WITH ME, OR ARE THERE QUESTIONS?
<labelle> still here
<Bonnie> (y)
<FrancesWV> still here too
<iamagas> here
<cak> (I was just gonna ask) So just setting the stamp on the melty EP is not enough?
* pmstamper waves bye and sorry I have to leave early.
<MeganBear> NO, CAK, I PUSH IT IN A BIT
<Cher> do you want to see the melted ep mush out a little on the sides of the stamp?
<iamagas> bye pm
<MeganBear> CHER - JUST A LITTLE BUT NOT REALLY
<Teri> Do you do these on matte board or c/s
<MeganBear> TERI - MATBOARD
<Teri> ty
<MeganBear> CS IS GOING TO BE TOO THIN
<Cher> ty
<Cher> you also mentioned cd's right?
<MeganBear> YOUR LG WON'T SMOOSH OUT TOO MUCH BECAUSE WE ONLY HAVE 3 LAYERS
<Cher> oh, ok
<MeganBear> WHEN YOU USE 4 OR MORE, YOU'LL REALLY SEE IT SMOOSH OUT
<MeganBear> I TEND TO STICK WITH JUST 3 LAYERS FOR TILE WORK
<MeganBear> AFTER YOU'VE GOT THE STAMP INTO THE TILE, WAIT APPROX 30 SECONDS ARE REMOVE THE STAMP
<MeganBear> AGAIN, YOU'LL HAVE TO PLAY WITH THIS PART, TOO, BECAUSE IT ULTIMATELY DEPENDS ON THE SIZE OF YOUR TILE
<MeganBear> AND THE AMOUNT OF LAYERS
<MeganBear> THE MELTED LG WILL NOT DAMAGE YOUR STAMP AT ALL
<MeganBear> SOME MAY KNOW, OR SOME MAY NOT, BUT STAMPS ARE MADE AT A TEMP OF OVER 325 DEGREES
<MeganBear> SO THIS MELTED LG IS NOTHING COMPARED TO THAT!
<MeganBear> MANYSTAMP, HERE'S A LIN
<MeganBear> http://www.bearrubberstamps.com/LiquidGlass.html
<Teri> what about polymer stamps, will it hurt those?
<MeganBear> I MEAN LINK
<MeganBear> I'VE HONESTLY NEVER TRIED THE POLYMER STAMPS WITH THIS, SO I DON'T KNOW
<manystamp> THX
<MeganBear> BUT I DON'T THINK THEY WILL HURT THEM EITHER
<Teri> ty
<MeganBear> YW
<MeganBear> OK, THAT'S THE FIRST FINISHED TILE, AND THE BASIC INSTRUCTIONS
<Professor> Have you tried this with UMs on acrylic mounts?
<MeganBear> YOU CAN NOW VARY THE POWDERS YOU USE TO GET DIFFERENT FINISHED RESULTS
<MeganBear> YES, PROFESSOR, AND THEY WORK FINE
<FrancesWV> I have, Professor
<cak> Ilove the effect of using the pearl eps on this--really gives it some depth I bet
<FrancesWV> Yes, they do.
<iamagas> This is weird. I learned this technique at a stampin up workshop on Sunday
<MeganBear> THAT
<MeganBear> THAT'S STRANGE
<MeganBear> AM I TEACHING IT THE SAME AS SU?
<iamagas> I think we used two layers of embossing powder and three of glassy glaze
<MeganBear> I'VE BEEN DOING THIS TECHNIQUE FOR CLOSE TO 5 YEARS NOW
<iamagas> otherwise, exactly the same
<MeganBear> I JUST LOVE IT
<cak> (the leaning tower of EP?)
<MeganBear> HUH?
<cak> 5 layers of ep! (I can just see it slippin' and slidin'. although I know it won't)
<AliciaG> =)
<iamagas> only a little
<MeganBear> OH, YES - THAT WOULD BE INTERESTING!
<MeganBear> OK, NOW THAT I'VE TAUGHT YOU THE BASICS, LET'S TALK ABOUT SOME VARIATIONS
<cindyc> url?
<MeganBear> I DID SAY EARLIER YOU COULD US CD'S
<MeganBear> http://www.bearrubberstamps.com/LiquidGlass.html
<cindyc> ty
<Teri> have you done this with different color layers?
<MeganBear> YES,
<MeganBear> BUT IT'
<MeganBear> OOPS
<MeganBear> IT'S THE LAST COLOR YOU'LL SEE THE MOST
<MeganBear> YOU MIGHT SEE PARTS OF THE OTHER LAYERS, BUT NOT A GREAT DEAL
<Teri> oh okay
<MeganBear> YOU TREAT THE CD'S THE SAME AS THE TILES
<MeganBear> JUST KEEP IN MIND THAT THEY GET MUCH, MUCH HOTTER
<MeganBear> AND SO TWEEZERS ARE HIGHLY RECOMMENDED WHEN USING CD'S
<MeganBear> GO TO THE SAMPLE PAGE
<MeganBear> http://www.bearrubberstamps.com/LiquidGlass.html
<MeganBear> AND LOOK AT THE FIRST ROW OF THREE BELOW THE FOUR PEARL SAMPLES
<MeganBear> THE ONE ON THE LEFT IS THREE LAYERS OF BLACK LG
<MeganBear> AND WHEN THE THIRD LAYER IS MELTED, AND BEFORE PRESSING IN THE STAMP
<MeganBear> I SPRINKLED SOME GREEN PEARL EX ONTO THE PIECE AND MELTED IT SLIGHTLY
<MeganBear> THEN PRESSED THE STAMP INTO IT
<MeganBear> I USED A CLEAR INK ON THE STAMP INSTEAD OF BLACK
<FrancesWV> Ahhhh! So pearl-ex is the trick to the different colors on some of the tiles.
<MeganBear> YES, MA'M
<FrancesWV> I just love that rose on the end. The one with the pink bloom on the gold background.
<MeganBear> AND YET ANOTHER WAY TO GET MORE COLOR SELECTIONS IS THE MIDDLE SAMPLE ON THAT SAME ROW
<MeganBear> THIS IS THREE LAYERS OF BLACK LG
<MeganBear> AND THEN A FOURTH LAYER IS JUST REGULAR EP, THIS COLOR IS BLACK SPARKLE
<MeganBear> THEN I PRESSED OUR PEAR STAMP INTO IT
<FrancesWV> Can you use a black tile or black ink instead of the black LG to get the same effect?
<cak> it sure is sprakly (I like sparkles very much)
<MeganBear> SO ONCE YOU GET YOUR THREE LG LAYERS BUILT UP, YOU CAN USE REGULAR EP OR PEARL EX TO VARY YOUR COLORS
<MeganBear> YES AND NO
<MeganBear> IF YOU USE A BLACK TILE, BLACK INK, AND CLEAR LG, IT WON'T BE A FLAT BLACK IN THE END
<MeganBear> WHEN YOU PUSH THE STAMP INTO IT, YOU'LL SEE A BIT OF THE CLEAR
<MeganBear> IT'S A NEAT EFFECT THOUGH
<FrancesWV> Ok.
<MeganBear> THE LAST TILE ON THAT ROW IS THE GOLD LG
<MeganBear> AND I STAMPED THE ROSE WITH CLEAR INK
<MeganBear> THEN I LET IT COOL FOR A COUPLE OF MINUTES
<MeganBear> THEN I USED A SOFT BRISTLE PAINTBRUSH AND DUSTED DIFFERENT PARTS OF THE ROSE WITH DIFFERENT COLORS OF PEARL EX
<MeganBear> BECAUSE THE PIGMENT INK IS STILL A BIT TACKY, THE PE STICKS TO IT
<FrancesWV> Won't it brush off when it dries?
<cak> that is stunning
<MeganBear> IKNOW WE DON'T HAVE MUCH TIME LEFT
<FrancesWV> Or smear off, I should say.
<MeganBear> KIMBERLY2, HERE'S A LINK
<MeganBear> http://www.bearrubberstamps.com/LiquidGlass.html
<MeganBear> NO, FRANCES, IT WON'T, UNLESS YOU RUB HARD ON IT
<FrancesWV> Thanks Megan.
<MeganBear> AGAIN, I'VE GOT A TILE IN FRONT OF ME, THE SAME ONE AS ON THE SAMPLE PAGE, AND THE PE IS NOT COMING OFF
<MeganBear> TAKE A LOOK AT THE SAMPLE PAGE AGAIN
<MeganBear> http://www.bearrubberstamps.com/LiquidGlass.html
<MeganBear> AND LET ME KNOW WHICH TILE YOU WOULD LIKE ME TO DESCRIBE NEXT
<MeganBear> THERE ARE SO MANY, AND WE DON'T HAVE MUCH TIME LEFT
<Professor> rgw last one
<MeganBear> I COULD PROBABLY TEACH THIS CLASS FOR TWO HOURS!
<labelle> wither one of the dragonflies
<FrancesWV> The Asian script with the watercolor looking background
<cak> You should! and please do--at least do a part 2 (and 3 if needed)
<MeganBear> PROFESSOR - WHAT IS RGW?
<MeganBear> I WANT TO MAKE SURE I HAVE THE RIGHT ONE
<Professor> bad typing
<cak> lol
<MeganBear> SO THE LAST ONE ON THE PAGE?
<Professor> It should be the last one - with the dragon flies
<iamagas> i agree
<Professor> yep please
<MeganBear> OK - THIS ONE IS ONE OF MY OLDEST AND FAVORITES!
<MeganBear> IT'S ACTUALLY USING A BIT DIFFERENT PRODUCT
<MeganBear> IT'S INTERFERENCE BLUE UTEE BY SUZE
<MeganBear> BUT YOU CAN GET THE SAME EFFECT WITH THREE LAYERS OF CLEAR LG
<MeganBear> ONE LAYER OF WHITE EP
<MeganBear> AND A SPRINKLING OF INTERFERENCE BLUE PEARL EX
<iamagas> oh great! somethin' else I gotta buy
<MeganBear> THE DRAGONGLY STAMP IS BY CREATIONS UNLIMITED
<FrancesWV> There's always something else to buy, iamagas!
<MeganBear> AND I PAINTED IN THE COLORS WITH PEARL EX
<MeganBear> I THEN LAYERED IT ONTO TWO MORE TILES
<MeganBear> IN GRADUATING SIZES THAT HAD BEEN STAMPED WITH A BACKGROUND STAMP
<MeganBear> FROGGIE - HERE'S THE LINK
<MeganBear> http://www.bearrubberstamps.com/LiquidGlass.html
<Judy> Meegan - is there a difference between LG and UTEE?
<MeganBear> IN MY OPINION - NO - JUST MADE BY TWO DIFFERENT COMPANIES
<FrancesWV> I like the LG because you don't have to buy a 5 ton jar to try out the colors
<MeganBear> I HAPPEN TO CARRY LIQUID GLASS
<Judy> they seem to come in more colors than UTEE
<MeganBear> I AGREE
<iamagas> yes Fran well said
<MeganBear> AND OF COURSE, YOU CAN MAKE ALL SORTS OF DIFFERENT COLORS YOURSELF
<MeganBear> JUST BY VARYING THE TOP LAYER
<MeganBear> THE ASIAN SCRIPT ONE IS ANOTHER ONE THAT WAS ASKED ABOUT
<FrancesWV> Yes
<MeganBear> THIS WAS DONE WITH THREE LAYERS OF CLEAR LG
<cak> I was intrigued by that one also
<MeganBear> ONE LAYER OF METALLIC MEDLEY REGULAR EP
<MeganBear> AND THEN STAMPED WITH THE HERO ARTS STAMP
<MeganBear> I THEN USED VARIOUS COLORS OF PEARL EX RANDOMLY BRUSHED OVER THE IMAGE WHILE IT WAS STILL SLIGHTLY WARM
<FrancesWV> I love that one
<FrancesWV> I love them all!
<FrancesWV> Very gorgeous samples
<MeganBear> I CONCENTRATED MORE GREEN OR BRONZE ON THE DRAGONFLIES, BUT DID RANDOM COLORS EVERYWHERE ELSE
<Froggie> Beautiful!!
<MeganBear> THANKS EVERYONE!
<labelle> no, thank you
<MeganBear> OK, NOW THE SPECIAL AGAIN REAL QUICK
<Teri> ty!
<MeganBear> AND REMEMBER, AS SOON AS CLASS IS OVER, I'LL GET IT ON THE CATALOG PAGE
<MeganBear> YOU'LL FIND IT AT:
<MeganBear> http://www.bearrubberstamps.com/catalog.html
<MeganBear> AND LOOK IN THE INKS & EMBOSSING POWDERS SECTION
<MeganBear> YOU'LL GET OUR COMPLETE LIQUID GLASS BEGINNERS KIT
<MeganBear> IT INCLUDES:
<MeganBear> 6 1-OUNCE JARS OF LG (CLEAR, BLACK, MELDED METALLIC, PEARL RED, PEARL GREEN AND GOLD)
<MeganBear> 2 1-OUNCE JARS OF REGULAR EP (NORTHERN LIGHTS AND SILVER)
<MeganBear> 1 BAGGIE OF 12 MATBOARD TILES
<MeganBear> 1 SAMPLE TILE MADE BY ME!
<MeganBear> 1 SMALL SHEET OF TEFLON
<MeganBear> AND INSTRUCTIONS FOR THE TECHNIQUE
<MeganBear> ALL FOR $20
<MeganBear> IT'S VALUED AT WELL OVER $20
<cak> this is a really good deal Megan
<Bonnie> THank you!!!
<MeganBear> I'LL ALSO BE PUTTING SOME INDIVIDUAL ITEMS FROM THE KIT THAT YOU CAN PURCHASE SEPARATELY
<MeganBear> ANY QUESTIONS!
<cak> Thank you for sharing with us! (for both the special and all the great ideas)
<Judy> Great class, Meegan. Thanks!
<MeganBear> ?
<FrancesWV> Thanks so much Megan! Great samples, class and specials.
<MeganBear> THANKS FOR COMING EVERYONE
<MeganBear> I HOPE YOU LEARNED SOMETHING
<Bibi> thanks, meegan, great class!
<MeganBear> AND HAD FUN
<labelle> thanks for the great ideas
<Jambalaya> Next Event is in #rubberart
<cak> will you teach again to finish up the ones we weren't able to get to?
<MeganBear> MAYBE I'LL HAVE TO DO A SECOND CLASS
<cak> Yes you will
<AliciaG> thank you megan
<Jambalaya> Next Event is in #rubberart
<MeganBear> OK - BYE EVERYONE!
<Bonnie> bye
<MeganBear> OFF TO UPDATE THE CATALOG!
<Cher> thank you!!
<MomCat> Thanks for a great class, Meegan
Log file closed at: 6/25/03 11:07:36 PM